FKN Systek Home Page

Video

PDF Data Sheet

 

  

FKNSystek

86 Kendall Avenue

Framingham, MA 01702

Tel. 508 935 2282

Fax 508 935 2286

 
 

 

News Release --- News Release --- News Release

 

 
 

PCB Singulation with the S300 Depaneling Saw

Separate up to 14 PCB panels in one operation - With built in  Dust Extraction

For Boards with sensitive SMT components, without scoreline or with overhanging components

 

 
 

 
 

 

Now available from FKN Systek, the S300 multiple blade depaneling saw for use in singulating assembled PCBs. The saw blade is a 2.95" (75mm) diameter .021" thick diamond coated cutting blade. The S300 is a PLC controlled machine which can singulate up to 24 lines in one pass. The operator places the board to be cut onto the tooling plate and a hold down lid is placed on top of the panel. STI safety sensors are built into the lid so operation will automatically cease if the lid is opened during the process.

Built in dust extraction vacuum and and external dust extraction line is provided for dust removal during the process and for board clean up after the singulation process is finished.

Built to provide a stress free method to singulate panels with sensitive surface mount components close to the edge of the parting section, the FKN systek diamond blade depaneling saws leave a smooth edge finish with minimal stress imparted to the PCB. The saws can also be used to singulate PCBs without scorelines, or to singulate PCBs with overhanging components on the parting line. Since the cutting depth can be set to just cut through the PCB itself, any components which overhang the parting line will remain intact.

For more PDF data sheets or Video see our home page, call or E Mail FKN Systek :

Contact: Werner Christ

FKN Systek

508 935 2282

E Mail: FKN@FKNSYSTEK.com

 
     
 
Copyrightę 1997, 98 FKN Systek, Inc.08/17/03 Last Update 08/20/05